KW Coilover V1 - M235i / M240i (F22) Coupé xDrive without electronic dampers
KW Coilover Variant 1 Inox fixed damping setup
Coupé; 4WD; without electronic dampers
Maximum allowed front axle weight: (KG) 1001-1020
Maximum allowed rear axle weight: (KG) -1120
Power: kW 240-250
Approved front lowering: (mm) 5-30
Approved rear lowering: (mm) 0-25
Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)
When using original tyres, wheel offset spacers may be required.
For cars which have electronic dampers, make sure they are shut down. Specific electric damper shut-downs are available from KW. Please check our accessories list.
Dampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.
Part Number: 1022000Q
KW Coilovers Variant 1
The KW coilover kit Variant 1 “inox-line” is the ideal entry-level system for customers who want the technically lowest possible suspension setting or for those who want to customise their own. In extensive road tests, our experienced engineers developed a target group - specific setup by establishing an optimum balance of sportiness, comfort and safety and then implementing this in the series.
Setup – factory-set pre-configured damping setup
The Variant 1 "inox-line" has a vehicle-specific, fix configured damping setup with a sporty and harmonious adjustment, which allows you to experience an optimal balance of sportiness and everyday practicality. Even with full payload and maximum axle loads, the dampers always work with a sporty characteristic.
The KW Variant 1 allows a maximum or individual lowering within the tested adjustment range. Due to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the continuous lowering can be varied quickly and easily, even after years.
The benchmark for coilovers
As with all KW coilovers, the engineers at KW develop in extensive test cycles on the Nürburgring Nordschleife and in our test center on the KW 7-post rig the vehicle-specific KW damper setup estimated by car enthusiasts worldwide. So you will experience your car even more directly and dynamically with a KW coilover kit.
After all, you do not buy just any coilover kit, but a KW coilover kit that has been especially developed and adapted for your vehicle type. KW as manufacturer exclusively uses own resources, high-quality components and the same damper technology as high-volume manufacturers. With the KW coilover suspension Variant 1 “inox-line”, the roll and pitch movements of the vehicle body are reduced during compression, so you benefit from an unadulterated directness and a sportier handling while driving.
Our experiences for your driving pleasure
For more than 20 years, we as manufacturer have been the market leader and innovator of individual suspension solutions for the street and racing applications. No matter where in the world, sporty drivers, automobile manufacturers and refiners rely on our KW coilovers “Made in Germany”.
Every KW coilover kit undergoes extensive stress tests during production and is developed and manufactured directly in our company headquarters in Fichtenberg in order to meet the high standards of our KW quality management. So for us as a German manufacturer, it is important that we guarantee a several-year warranty on our KW coilover kits, which exceed the original equipment manufacturer quality, as well as suspension solutions which include more than 4,600 applications.